FDFORMATSection: Linux Programmer's Manual (8)
Updated: 1 February 1993
Index Return to Main Contents
NAMEfdformat - Low-level formats a floppy disk
SYNOPSISfdformat [-n] device
DESCRIPTIONfdformat does a low level format on a floppy disk. device is usually one of the following (for floppy devices, the major = 2, and the minor is shown for informational purposes only):
- /dev/fd0d360 (minor = 4) /dev/fd0h1200 (minor = 8) /dev/fd0D360 (minor = 12) /dev/fd0H360 (minor = 12) /dev/fd0D720 (minor = 16) /dev/fd0H720 (minor = 16) /dev/fd0h360 (minor = 20) /dev/fd0h720 (minor = 24) /dev/fd0H1440 (minor = 28) /dev/fd1d360 (minor = 5) /dev/fd1h1200 (minor = 9) /dev/fd1D360 (minor = 13) /dev/fd1H360 (minor = 13) /dev/fd1D720 (minor = 17) /dev/fd1H720 (minor = 17) /dev/fd1h360 (minor = 21) /dev/fd1h720 (minor = 25) /dev/fd1H1440 (minor = 29)
The generic floppy devices, /dev/fd0 and /dev/fd1, will fail to work with fdformat when a non-standard format is being used, or if the format has not been autodetected earlier. In this case, use setfdprm(8) to load the disk parameters.
For ATAPI IDE floppy driver (also known as LS-120 drives or "Superdisk" drives) you have to use the floppy(8).
- No verify. This option will disable the verification that is performed after the format.
SEE ALSOfd(4), setfdprm(8), mkfs(8), emkfs(8), floppy(8)
AUTHORWerner Almesberger ([email protected])
AVAILABILITYThe fdformat command is part of the util-linux-ng package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.
This document was created by man2html, using the manual pages.
Time: 05:34:25 GMT, December 24, 2015